Fruit preservation cabinets are essential electrical equipment in daily life and supermarkets, but power issues are also a concern for many customers. So, let's introduce the energy-saving methods of fruit preservation cabinets to you.

1. It should be placed in a place with low ambient temperature and good ventilation conditions, and there should be appropriate space on the left and right sides of the top and back of the freezer and fruit preservation cabinet to facilitate heat dissipation.

2. Reduce the number of times fruit preservation is rejected. The more times the fruit preservation door is opened, the greater the power consumption. Therefore, when opening the fruit preservation door, it is recommended to shorten the opening time and try to open the door of the fruit preservation cabinet when the fruit preservation compressor is started. This can reduce the number of times the fruit preservation cabinet compressor is started and reduce the power consumption of the fruit preservation cabinet

3. The temperature regulator gear should be reasonably selected. The power consumption of the fruit preservation cabinet is directly related to the temperature maintained inside the fruit preservation cabinet. The lower the temperature, the greater the power consumption. Therefore, when using fruit preservation baskets, families should adjust the temperature regulator gear based on the actual amount of food storage, refrigeration requirements, minimum time, and season. The refrigeration temperature in the refrigeration room should be 12 degrees higher than the freezing temperature of the food

It is advisable.

4. There should be a certain amount of space between the food and food in the freezer, as well as between the food and the inner wall of the water tank, to make the fruit freshness cabinet empty and flow, improve the cooling effect, and reduce the number of compressor starts and time.

5. The freezer adopts imported compressor units, which are highly efficient, environmentally friendly, and energy-saving. However, when the frost thickness in the freezer exceeds 5mm, the cooling effect will deteriorate, and the relative working time of the compressor will be extended, resulting in a relatively increased power consumption. Therefore, regular defrosting is also necessary.

6. Regularly clean the dust on the condenser. If the condenser accumulates dust for a long time, it will affect the heat dissipation of the fruit freshness cabinet, which will not effectively evaporate and affect the cooling effect. To reach the predetermined temperature of the refrigerator, it is necessary to extend the working time of the compressor and increase power consumption. So it's best to clean the condenser every two years.

7. Place water cubes in the freezer and use the freezer to thaw food. If some water cubes are made while freezing frozen food, they can be packaged in containers and placed in the refrigeration room to reduce the starting time of the fruit preservation phase compressor and achieve the goal of energy conservation. Similarly, food that needs to be thawed in the freezer can be placed in the freezer to thaw, achieving the goal of electricity conservation.

If the refrigerated cabinet is open, it should be free from wind and blow directly. You can turn off the night curtain when it is not open.

9. It's best to make your own food at night. Because the temperature is relatively low at night, it is beneficial for the condenser to dissipate heat, and there is little time to open the refrigerator at night, which can save some time.

10. The food stored in the fruit preservation cabinet should be in moderation, about 80% of the volume is best, otherwise it will affect the air convection inside the fruit preservation cabinet, making it difficult to dissipate heat from the food, which can affect the preservation effect and increase power consumption

The above is our personal introduction on energy-saving knowledge of fruit preservation. We hope our personal introduction can be helpful. If you want to learn more about water preservation cabinets, you can visit our website and I will provide you with more professional information